Minggu, 27 November 2011

routing 6 router di packet tracer CLI

06.36 XI TKJ 2@ SMK NEGRI 3 TNG No comments



Untuk membuat jaringan seperti ini kta memerlukan perangkat/ alat-alat yaitu
#      6 router
 #      2 switch   
5 pc
# Kabel  cross
    #  Kabel straight
#langkah pertama adalah  mendesain terlebih dahulu jaringan yang akan kita buat
Setelah itu .hubungkan menggunakan kabel cross dan straight
                             
setting ip router

double click router,lalu pilih CLI
lalu ketikan
===============================================================
ROUTER 1

Router>EN
Router#CONF T
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fastethernet 0/0
Router(config-if)#ip address 192.168.10.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#interface fastethernet 1/0
Router(config-if)#ip address 192.168.20.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
Router(config-if)#exit

ROUTER 2
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.20.2 255.255.255.0
Router(config-if)#no sH
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 192.168.30.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router#
%SYS-5-CONFIG_I: Configured from console by console

Router 3
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.30.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 192.168.40.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router 4
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.40.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upRouter(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 192.168.50.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router(config-if)#

Router 5
router 5
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.50.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 192.168.60.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
Router(config-if)#

Router 6

Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.60.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 192.168.70.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router(config-if)#





Setelah semua ip telah di konfigurasi pada router sekarang tinggal membuat jalur pengiriman data /
IP ROUTE

NB: TULISKAN TERLEBIH DAHULU  Router(config)#ip route Baru masukan alamat yang ada di bawah ini
Contoh: Router(config)#ip route 192.168.30.0 255.255.255.0 192.168.20.2
ROUTER  1
NETWORK TUJUAN
NETMASK
GATE WAY
192.168.30.0
255.255.255.0
192.168.20.2
192.168.40.0
255.255.255.0
192.168.30.2
192.168.50.0
255.255.255.0
192.168.40.2
192.168.60.0
255.255.255.0
192.168.50.1
 192.168.70.0
255.255.255.0
192.168.60.2

ROUTER 2
NETWORK TUJUAN
NETMASK
GATE WAY
192.168.10.0
255.255.255.0
192.168.20.1
192.168.40.0
255.255.255.0
192.168.30.2
192.168.50.0
255.255.255.0
192.168.40.2
192.168.60.0
255.255.255.0
192.168.50.1
 192.168.70.0
255.255.255.0
192.168.60.2

ROUTER 3
NETWORK TUJUAN
NETMASK
GATE WAY
192.168.30.0
255.255.255.0
192.168.20.2
192.168.10.0
255.255.255.0
192.168.20.1
192.168.40.0
255.255.255.0
192.168.50.2
192.168.60.0
255.255.255.0
192.168.50.1
192.168.70.0
255.255.255.0
192.168.60.2

ROUTER 4
NETWORK TUJUAN
NETMASK
GATE WAY
192.168.30.0
255.255.255.0
192.168.40.1
           192.168.40.0
255.255.255.0
192.168.30.2
192.168.50.0
255.255.255.0
192.168.40.2
192.168.60.0
255.255.255.0
192.168.50.1
192.168.70.0
255.255.255.0
192.168.60.2

ROUTER 5
NETWORK TUJUAN
NETMASK
GATE WAY
192.168.40.0
255.255.255.0
192.168.50.2
192.168.30.0
255.255.255.0
192.168.40.1
192.168.20.0
255.255.255.0
192.168.30.1
192.168.10.0
255.255.255.0
192.168.20.1
192.168.70.0
255.255.255.0
192.168.60.2


ROUTER 6
NETWORK TUJUAN
NETMASK
GATE WAY
192.168.50.0
255.255.255.0
192.168.60.1
           192.168.40.0
255.255.255.0
192.168.50.2
192.168.30.0
255.255.255.0
192.168.40.1
192.168.20.0
255.255.255.0
192.168.30.1
192.168.10.0
255.255.255.0
192.168.20.1

setelah itu setting ip address komputer mengikuti gateway yang telah di daftarkan pada router tadi.

Lakukan setting pada seluruh pc yang ada

lalu lakukan test menggunakan amplop kuning

terimakasih semoga bisa di mengerti ...

Posted in:

0 komentar:

Posting Komentar

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | GreenGeeks Review